[BitVisor-devel-en:111] Bitvisor Wireguard problems?

[Lonnie Cumberland]

Hello All,

I have been struggling with trying to get bitvisor to work with 
wireguard and have been following the "bitvisor/docs" for the ReadMe of 
"wireguard_guest_os.md"

Also, I have a wireguard server set up on a VPS system and can connect 
to the wireguard server via native Windows 10 (x64) and also have set up 
Ubuntu 24.04 (x64) in a VMware Workstation 17 Pro for which I can also 
connect to the wireguard server when both of these are not running bitvisor.

When I am running bitvisor with the "net=ippass" then I can access the 
Internet with no problems as well, but the moment I set up bitvisor to 
use wireguard (also selecting it in the "make config") and setting 
"net=ipwggos" then it seems that I cannot connect to the wireguard 
server on the VPS system.

My Configuration "Defconfig" for this sections is:

--------------------------------------------
                 .tty_pro1000 = 0,
                 .tty_rtl8169 = 0,
                 .tty_x540 = 0,
                 .tty_ieee1394 = 0,
                 .driver = {
                         .pci = "driver=pro1000,net=ipwggos,tty=1,virtio=1",
                 },
                 .iccard = {
                         .enable = 0,
                         .status = 0,
                 },
         },
         .ip = {
                 .use_dhcp = 0, >>>>>>>>>>> The local VM system is 
bridged with the host and gets a 192.168.1.xxx IP address
                 .ipaddr = { 0, 0, 0, 0 },
                 .netmask = { 0, 0, 0, 0 },
                 .gateway = { 0, 0, 0, 0 },
         },
         .wg = {
                 .ipaddr = { 10, 5, 0, 100 },
                 .netmask = { 255, 255, 255, 0 },
                 .gateway = { 0, 0, 0, 0 
},                                 >>>>> Not sure as to what Gateway 
that I should have here. ?????
                 .ipaddr_end_point = { 154, 53, 48, 214 },
                 .peer_allowed_ip = { 0, 0, 0, 0 },
                 .peer_allowed_mask = { 0, 0, 0, 0 },
                 .peer_endpoint_port = 51820,
                 .wg_listen_port = 51444,
                 .wg_private_key = "(REDACTED HERE)",  /* I have the 
actual private key when needed */
                 .peer_public_key = 
"WhaBE3ruQgEgBvwK6+MWqmUjfeEwXHcS/2fQrEAlZRg=",   /* Public key of the 
Wireguard Server */
         },
         .wg_gos = {
                 .ipaddr = { 10, 5, 0, 99 },
                 .dns = { 8, 8, 8, 8 },
                 .mac_gateway = { 0x02, 0x48, 0x84, 0x76, 0x71, 0x00 },
         },
         .tls = {
                 .srv_cert = "",
                 .srv_key = "",
                 .ca_cert = "",

--------------------------------------------

Any help would be greatly appreciated.

Thanks and have a great day
Lonnie